It is our strong recommendation that designers specify an IPC slash sheet type for the pcb and not a particular manufacturer and laminate type. This gives the fabricator maximum acceptable latitude when choosing the material for a build and can help significantly to reduce cost.

If there is an explicit reason why a design has to be built with a certain type of material, National Technology will make every effort to comply or suggest an available alternative that matches the performance characteristics of thee laminate that was specified.

Mfg Type Resin 4101 Tg Td T-260 T-288
Isola IS-402
Download Spec Sheet
FR-4 Epoxy /21 140 320 15
Isola FR-406
Download Spec Sheet
FR-4 Epoxy /21/24/26/28 170 300
Isola 185HR
Download Spec Sheet
Modified Epoxy /21/24/26/98/99/101/126 170 340 60 >15
Isola 370HR
Download Spec Sheet
Modified Epoxy /21/24/26/98/99/101/126 180 340 60 30
Isola P-95 Polyimide 40/41/42 260 416
Nanya FR-4-86
Download Spec Sheet
FR-4 Epoxy /21 140 321
Nanya NP-140 FR-4 Epoxy /21 140 321
Nanya NP-170 FR-4 Epoxy /24 170 327
Iteq IT-588 Modified Epoxy /24/101 135 335 60 15
Iteq IT-158 Modified Epoxy /24/99 155 360 60 15
Iteq IT-180 Modified Epoxy /24 180 350 60 60
TUC TU-622-5 FR-4 Epoxy /21 135 310 20
Nelco 4000-7
Download Spec Sheet
FR-4 Epoxy /21/98 155 330 16
Nelco 4000-11 Modified Epoxy /26/83/98/99 170 345 30
Nelco 4000-29
Download Spec Sheet
Modified Epoxy 24/28/98/99/126 185 350 60 15

Materials highlighted in red are not stock materials.